English Deutsch

Combined walk-behind tractor KM5 13,0PS with Honda GX390 engine

Combined walk-behind tractor KM5 13,0PS with Honda GX390 engine
Product no.: B2.1-13,0PS-Honda-GX390

3.890,00 EUR   19 % VAT incl.

Shipping inside Germany: 110,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up


Combined walk-behind tractor KM5 13,0PS with Honda GX390 engine Item is temporarily not available!


(Sweeper not included)

The universal two-wheel-tractor which leaves nothing to be desired - whether for sophisticated private use or commercial gardening and landscaping.

The robust construction and the various implements allow it to be a reliable and safe help.

The two wheel tractor is produced in Italy as 90% of all combination units. From there, the devices are sold worldwide - in different colors, versions, engines, spar and sticker

Since 1997, we buy from this company two-wheel-tractors, which we sell retail and wholesale.

The walkbehind tractor is ready for use and complete assembled, it will be delivered on a disposable pallet. You just need to remove the stretch film, refuel petrol and off you go.

We sell only products, which even have been extensively tested and found to be good.

We guarantee a serious carrying out. You have a full right of return.

Specification

  • electronic ignition
  • 9,6& kW/13,0 PS easy-start Honda Motor GX390 with 389 ccm
      max. power at 3600 rpm
  • heavy-duty, durable multi-plate disc clutch
  • 3 forward and 3 reverse gears (EN 709 standard) with limited slip differential
  • Reverse gear (quick switching from forward to reverse)
  • differential and lock
  • solid hitch
  • Quick spar adjustment
  • independent drum brakes, single acting as a steering brake on each wheel
  • Included: - agricultural 5.00x10 tires with rim exchange
    - the wheel base can be adjusted 2x
    - Quick-change connector and hitch for the single axle trailer



Gear damage, and serious engine damage never occurred. Typically, a Bowden cable, a spark plug or a air filter get broken. But that"s it!

We can deliver spare parts quick and easy.

As major advantage we see the compact design of the machine. The engine is flanged directly via a powerful clutch to the gearbox. To the end of the gear unit a large-sized quick release fastener is screwed where all the implements can be changed quickly without tools. This is an important advantage compared to the Japanese manufacturers of two wheel tractors, they implement the transmission of power through V-belts.

Special Features: As an important wear part, the clutch is a reinforced multi-plate clutch disc, fitted as standard from the factory. We could have let them install also a cheaper cone clutch, but the service life of these clutches is very limited when the clutches are used with tillers / snowblowers or rotary mowers.



This is the multi-plate clutch with 4 single clutch discs.


Here is the comparison between the two clutch inserts - once the small contact surface of the cone clutch (right) and in turn the significantly higher contact surface the multiple disc clutch (left).


cone clutch

Video KM5 at work
(mounted implements not included):


Speed ​​of the walkbehind tractor

Every walkbehind tractor can be supplied on request with a electric starter set, battery and battery holder for a surcharge of 350,00 €.

For an additional charge we can supply the walkbehind tractor with a trailer equipped road leagal.



 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Customers who bought this product also bought the following products:

Mulcher-mower Falc8 for two wheel tractors with 80 cm working width

Mulcher-mower Falc8 for two wheel tractors with 80 cm working width

1.590,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.654s