Snow blower SF120H hydraulic with 120cm working width
The snow blower is heavy and robustly built.
A long ejection chimney ensures precise ejection.
The snow blower is driven by a hydraulic motor.
The front snow blower is thus supplied via the loader's own hydraulic circuit.
The chimney and the ejection flap are operated electrically.
The snow blower can be individually attached to the loader.
This is always an adjustment on the part of the customer.
We guarantee a serious transaction - you have a full right of return.
Technical specifications:
- working width: 120 cm
- feed height: 60 cm
- ejection distance: up to 15 m
- dead weight: approx. 296 kg
continuously adjustable support wheel
The customer has to procure these hydraulic hoses himself because we cannot know which connections are available on the wheel loader.
Important!!! The hoses should be chosen as large as possible so that a corresponding amount of oil can flow through.
Hydraulic motor drive
A hydraulic motor is installed as standard!
This engine is designed for tractors up to 30 HP.
We will supply you with an additional hydraulic motor free of charge.
For this we need the liter output of the hydraulic pump of your drive unit (e.g .: 40 l / min; and the pressure information e.g .: 150 bar / 220 bar)
electric chimney swivel
double ejection flap, electrically adjustable
EL joystick control
2-way height adjustable front coupling triangle
4-blade discharge fan
Front connection plates
The snow blower is located at Augustusburg Castle / Saxony. We are happy to provide a reference / contact.
Augustusburg Castle
Here you can see two pictures and a video of a customer working on wet snow. The snow blower is attached to a Kramer wheel loader.
Here you can see two videos of the SF120H / SF140H snow thrower in dry snow.
