The trailer spreader is attached to the axle of the two wheel tractor. Thus, the sweeper sweep every bump or unevenness because the walk-behind tractor is fully articulated and because the pivot point is on the axle.
Included in delivery:
- 1 walk-behind tractor KM5 with 13 ps engine completely
- 1 add-on sweeper with a working width of 100 cm and roller diameter of 40 cm
- 1 stainless spreader
The universal two-wheel-tractor which leaves nothing to be desired - whether for sophisticated private use or commercial gardening and landscaping.
The robust construction and the various implements allow it to be a reliable and safe help.
The two wheel tractor is produced in Italy as 90% of all combination units. From there, the devices are sold worldwide - in different colors, versions, engines, spar and sticker
Since 1997, we buy from this company two-wheel-tractors, which we sell retail and wholesale.
Gear damage, and serious engine damage never occurred. Typically, a Bowden cable, a spark plug or a air filter get broken. But that"s it!
We can deliver spare parts quick and easy.
There are 3 wholesalers in Germany selling this product also. But we should not name their names on the networkor there will be problems with the trademark.
As major advantage we see the compact design of the machine. The engine is flanged directly via a powerful clutch to the gearbox. To the end of the gear unit a large-sized quick release fastener is screwed where all the implements can be changed quickly without tools. This is an important advantage compared to the Japanese manufacturers of two wheel tractors, they implement the transmission of power through V-belts.
The walkbehind tractor is ready for use and complete assembled, it will be delivered on a disposable pallet. You just need to remove the stretch film, refuel petrol and off you go.
We sell only products, which even have been extensively tested and found to be good.
We guarantee a serious carrying out. You have a full right of return.
Specification
- 9,6 kW/13, 0 PS easy-start STX 390 petrol engine with 390 ccm
- electronic ignition
- heavy-duty, durable multi-plate disc clutch
- 3 forward and 3 reverse gears (EN 709 standard) with limited slip differential
- Reverse gear (quick switching from forward to reverse)
- differential and lock
- solid hitch
- Quick spar adjustment
- independent drum brakes, single acting as a steering brake on each wheel
- Included: - agricultural 5.00x10 tires with rim exchange
- the wheel base can be adjusted 2x
- Quick-change connector and hitch for the single axle trailer
- Weight of walkbehind tractor with motor and sweeper about 130 kg
Special Features: As an important wear part, the clutch is a reinforced multi-plate clutch disc, fitted as standard from the factory. We could have let them install also a cheaper cone clutch, but the service life of these clutches is very limited when the clutches are used with tillers / snowblowers or rotary mowers.
This is the multi-plate clutch with 4 single clutch discs.
Here is the comparison between the two clutch inserts - once the small contact surface of the cone clutch (right) and in turn the significantly higher contact surface the multiple disc clutch (left).
cone clutch
videos :
Speed of the walkbehind tractor
Specification add-on sweeper
- Working width: 100cm
- Brush diameter: 45cm
- pivotably from the handlebar
Specification stainless steel spreader
- 100 liter tank contents
- with metal gears, agitator and pneumatic wheels
- Spreading width 2-5 m (range is adjustable)
- 9 times electrohydraulic adjustment
- 200 kg payload
- 32.5 kg net weight
- Wide tires: 145x70-8
- standard with tarpaulin
The spreader is equipped with an adapter that fits in our KM5 walk-behind tractor.
The spreading width can be adjusted by hand lever, which actuates a slider. Thus, the spread rate is regulated.
The spreader is provided with a removable agitator finger and with an agitator.
The diffusing screen and the gearbox are completely made of stainless steel (Nirosta).
The container and any movable parts are made from stainless steel. The frame and towbar are made of steel and are powder coated.
There are wide pneumatic wheels with studded tires 145x70-8 mounted - of course with ball bearings. One wheel is idling with the axis, the other is connected to the axle by means of cotter pin and drives it.
The deflector prevents the spreading material to hurl at the tractor.
A covering tarpaulin is supplied as standard.
For an additional charge we can supply the walkbehind tractor and trailer equipped road leagal. Therefore it is necessary to equip the unit with a headlight and the entire lighting system.
